The secret to sidewalk & walkway cleaning for concrete is using the right method, not the most pressure. In Clovis, CA, we match the cleaner and pressure to the surface so it comes out clean without damage. On concrete, the method we use is pressure wash with a surface cleaner.
Method and pressure
Cleaning solution: A degreaser for oil spots and a pre-treatment for organic growth; post-treatment slows regrowth.
What to know about cleaning concrete
Plain broom-finish concrete is the surface pressure washing is made for. A rotary surface cleaner gives an even finish without the stripes a wand leaves, and hot water helps with grease and oil.
Avoid: Holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete.
How often: Every year, or every 6 months in shaded, damp spots.
When to book sidewalk & walkway cleaning for concrete
- Slippery paths after rain
- Green or black growth along shaded edges
- Gum, leaf stains or rust spots
- Uneven, blotchy color
Why it gets dirty
- Shade and moisture along the house
- Foot traffic and dropped food or gum
- Leaves and berries that stain
- Sprinkler overspray
What you can do yourself
- Sweep away leaves before they stain
- Scrub small slippery patches with a stiff brush and a deck or patio cleaner
- Trim plants that keep paths shaded and damp
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Why more pressure isn’t better
- Slipping on wet, treated surfaces
- Water and debris sprayed onto doors, windows and cars
- Lifting loose joint material between slabs
How we handle sidewalk & walkway cleaning for concrete
- Sweep and inspect
- Pre-treat growth and stains
- Clean with a surface cleaner
- Detail edges and steps
- Rinse and post-treat
Typical sidewalk & walkway cleaning for concrete prices
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for concrete
- Pressure Washing for Concrete
- Driveway Cleaning for Concrete
- Patio Cleaning for Concrete
- Pool Deck Cleaning for Concrete
- Concrete Sealing for Concrete
- Rust Stain Removal for Concrete
- Oil Stain Removal for Concrete
- Graffiti Removal for Concrete
- Gum Removal for Concrete
- Efflorescence Removal for Concrete
- Exterior Mold & Mildew Removal for Concrete
- Commercial Pressure Washing for Concrete
- Parking Lot & Garage Cleaning for Concrete
- HOA & Apartment Pressure Washing for Concrete
Local sidewalk & walkway cleaning for concrete for Clovis, CA
Driveways and patios in California collect oil, dust and tire marks over the long dry season. Cleaning with a surface cleaner and controlling the wash water keeps it out of storm drains.
Some cities in California limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.
Besides Clovis (ZIP codes 93611, 93612, 93613 and 93619), we handle sidewalk & walkway cleaning for concrete in Tarpey Village (2.2 mi), Old Fig Garden (5.9 mi), Fresno (6.6 mi) and Sanger (11.5 mi). Call (555) 010-0000 for a free quote in Clovis.
Sidewalk & Walkway Cleaning for Concrete: frequently asked questions
How much does sidewalk & walkway cleaning for concrete cost in Clovis, CA?
Sidewalk & Walkway Cleaning for Concrete typically costs $100-$250 for a typical front walk and side paths, and usually takes About 1 hour. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for sidewalk & walkway cleaning for concrete?
For concrete: usually 2,500-3,500 PSI with a rotary surface cleaner for even results. What we avoid: holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete. We keep the pressure even and controlled, with the right tools for the surface.
Is sidewalk & walkway cleaning for concrete safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule sidewalk & walkway cleaning for concrete?
Every year, or every 6 months in shaded, damp spots. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.