Looking for gum removal for pavers in Clovis, CA? We look at the surface first, choose the right method and pressure for it, and give you a price before any work starts. For pavers, that means pressure wash with a surface cleaner.
How we clean it
Cleaning solution: A paver cleaner or pre-treatment; efflorescence needs a dedicated cleaner.
Cleaning pavers safely
Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them. Re-sanding the joints, often with polymeric sand, and sealing afterward keeps weeds and ants out and holds the pavers in place.
Avoid: A narrow tip aimed into the joints, which blows out sand and can loosen pavers.
How often: Clean every 1-2 years; reseal every 2-4 years.
Signs you need gum removal for pavers
- Black dots across entrances and walkways
- Gum on steps and near benches
What causes the dirt and stains
- Foot traffic
- Gum hardening and collecting dirt
What you can do yourself
- Scrape fresh gum before it gets ground in
- Put bins near entrances
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Common mistakes to avoid
- Cold-water pressure alone smears gum and etches the concrete
- Chemical removers that stain
Our process for gum removal for pavers
- Survey the area
- Soften gum with hot water or steam
- Remove it with a surface cleaner and detail tools
- Clean the surrounding area for an even look
- Schedule maintenance visits if needed
Typical gum removal for pavers prices
What moves the price:
- Area and number of buildings
- Scheduling: early-morning, overnight or weekend work
- Whether wash water has to be recovered under local stormwater rules
- Frequency: recurring service is usually priced lower per visit
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for pavers
- Pressure Washing for Pavers
- Driveway Cleaning for Pavers
- Sidewalk & Walkway Cleaning for Pavers
- Patio Cleaning for Pavers
- Pool Deck Cleaning for Pavers
- Paver Cleaning & Sealing for Pavers
- Rust Stain Removal for Pavers
- Oil Stain Removal for Pavers
- Efflorescence Removal for Pavers
Local gum removal for pavers for Clovis, CA
Commercial properties in California need sidewalks, entrances and dumpster areas cleaned regularly, with wash water kept out of storm drains to meet local stormwater rules.
Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.
Some cities in California limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.
Besides Clovis (ZIP codes 93611, 93612, 93613 and 93619), we handle gum removal for pavers in Tarpey Village (2.2 mi), Old Fig Garden (5.9 mi), Fresno (6.6 mi) and Sanger (11.5 mi). Call (555) 010-0000 for a free quote in Clovis.
Gum Removal for Pavers: frequently asked questions
How much does gum removal for pavers cost in Clovis, CA?
Gum Removal for Pavers typically costs $200-$1,000 depending on the area and how much gum there is, and usually takes 2-6 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for gum removal for pavers?
For pavers: usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possible. What we avoid: a narrow tip aimed into the joints, which blows out sand and can loosen pavers. We keep the pressure even and controlled, with the right tools for the surface.
Is gum removal for pavers safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule gum removal for pavers?
Clean every 1-2 years; reseal every 2-4 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.